Sanitizing

Disinfection and cleaning services in Angeles and Clark

How our disinfection is done?

, , , , , , , , 0

In one of our previous post, we discussed the difference between cleaning, sanitizing, disinfecting and sterilizing. If you haven’t seen it yet, please check it out here.

This time, we want to show you how Clean X translates all of these into our complete cleaning offering.

Cleaning

Our Cleaning depends of the surface.

When we are dealing with a piece of furniture that is made of fabrics, our cleaning consists in vacuuming its surface.

The vacuum we use is a hydrovac type. It means that when in operation, it sucks all the dirt and dust and traps it into water. This is important as it won’t release these into the air, unlike household vacuums.

For surfaces such as desks, tables, copy machines, etc. We wipe them with a cleaning agent.

Though this is our basic service, we usually go an extra mile by sanitizing our client’s space.

Sanitizing

This step is offered by default with our general cleaning and it consists of the following:

Dry steaming of surfaces in order to clean them even further and to kill germs such as bacteria, fungi, parasites and viruses.

Our steaming process has a wide range of use such as deep cleaning and sanitizing fabric made furniture (carpet, sofa, curtains, beds, etc.).

It is also very efficient in cleaning hard to get places and difficult to remove stains and dirt. For instance, steam is very efficient into cleaning cooking stoves and bathrooms grout tiles.

Not only it cleans them, but it also sanitize them.

As we mentioned it before, the purpose of steam sanitizing is to lower the presence of germs into a level that is safe to humans. It is one of the most environmentally friendly and cost effective way to clean and sanitize a surface.

For our clients who needs an extra level of cleaning, we offer disinfection services.

Disinfection

Our disinfection service can only happen after the two previous steps have been carried out.

Depending on our client’s needs, we offer the following:

Surface disinfection

This is done with the application of Hospital Grade Disinfectant onto surfaces such as desks, tables, kitchen top, etc.

This step will kill 99.9% of germs including the famous coronavirus. 

We’ll also apply our disinfecting solution to frequently touched surfaces like doorknobs.

Room disinfection

In order to disinfect a room completely, the best and fastest way is to use a fogging machine that will cover the entire room with a disinfectant. 

Not only the air will be in contact with the disinfecting solution but also all the surfaces.

As our machine is capable of making 5 microns disinfecting droplets, these will be able to reach all nooks and crannies of your house or office.

This is the best and cost effective way to clean big spaces.

Sterilization

In laboratory, sterilization is done by steaming utensils in a close compartment for a long period.

Unfortunately, it is not applicable for sterilizing open spaces.

Nevertheless, there’s an other technology that is used to sterilize water, utensils and bigger space: Ultraviolet Light.

In a previous post, we discussed the advantage of UV lights. You may want to visit it here.

Clean X offers UV lights sterilization and its application will kill all microbes including bacteria, viruses, parasites and fungus.

Disinfection misting service

cleanx.clark

CLEAN X Clark
This error message is only visible to WordPress admins
There has been a problem with your Instagram Feed.

As you see, Clean X offers every solutions from cleaning to sterilizing your space.

You may want to visit our full list of services by clicking here.

Contact us anytime if you want more information about our disinfection services and if you want to know about our competitive rates.

Disinfection cleaning services in Angeles, Clark, Pampanga Philippines

Fogging disinfection in action

, , , , , , , , 0

Clean X offers disinfection services against this pandemic in Angeles and Clark. On the following footage, you can see the fogging machine that we use.

This machine creates a 5 micron particles that together become a mist or fog that can reach the smallest nooks in your office or home.

The chemical we use kills 99.9999% of germs, including corona viruses.

Because of this machine, we can offer competitive prices to make your house disinfected at an affordable rate.

Contact us for a quotation here or visit our complete set of services here.

Clean X UV light for disinfection

How to use Clean X UV light

, , , , , , 0

Clean X offers UV light sanitizing when you book our disinfection services.

In addition, our UV lights are for sale or for rent so you can disinfect your space yourself.

Please read our previous post on how ultraviolet lights can kill germs, including viruses.

Because UV lights produce a high energy light, it may become harmful to people and animals.

It is therefore very important for you to READ, UNDERSTAND and FOLLOW this guide.

Failure to do so may lead to skin or eye disease.

Also, please handle the device with care as the bulbs are very fragile.

Content of our UV light package

Our UV light

Clean X UV light close up for house and office disinfection

A wireless adapter

Clean X UV light wireless adapter

A 3 to 2 pin plug adapter

Clean X UV light 3 to 2 pin plug adapter for disinfection

A remote to activate the light wirelessly.

Wireless remote for Clean X UV light disinfection service

Step by step guide on how to use Clean X UV light for home or office disinfection

Step 1: place the light in the room you want to sanitize

Step 2: make sure the light switch is in the OFF position

Step 3: plug the light into the wireless switch, then plug it in your electrical outlet with the 3 to 2 pin plug adapter.

Step 4: make sure the wireless plug adapter is in the OFF position. If you don’t see a red light on the adapter, it means it’s off.

Clean X UV light operation guide for disinfection of your home or office

Step 5: Turn ON the light

Step 6: LEAVE THE ROOM

Step 7: Turn on the wireless adapter via the remote by pressing the red button once. The remote will blink red once confirming the light is now ON.

Step 8: Wait 15 minutes

UV light disinfection guide

Step 9: Turn OFF the UV light by pressing the wireless remote once. A blinking red light will flash to confirm the input.

Step 10: After making sure the light is turned OFF, you may enter the room to open the windows. The room must be ventilated for 20 minutes. DO NOT STAY INSIDE as the operation of the UV light leads to a certain odor. DO NOT TOUCH the light as it is VERY HOT.

After the use of the UV light, please CAREFULLY pack it back in its box

For any question about the use of our UV light or for any inquiry of our cleaning and disinfection service, please contact us.

UV light for disinfection

Are UV lights effective for virus disinfection?

, , , , , , , , , , 0

With the active pandemic, we realized that without a working vaccine, we are ill equipped to fight the battle against new emerging viruses.

Because of the highly contagious property of SARS-NCOV-2 (the virus responsible for COVID-19), we are all looking for ways to disinfect our space, be it at home or in our workplace.

Though we have some ways to minimize our exposure (social distancing), we also have other ways to kill the virus on the surface of our homes or office. One example is chemical disinfectant.

Nevertheless, disinfectants have limitations: they cannot reach porous surfaces like fabrics nor nook and crannies that the user missed.

Fogging disinfectant chemicals is an other solution where the fog created by the mix of water and disinfectant can reach smaller places and allows fast disinfection of huge space. Unfortunately, it is possible for the fog to miss a virus because it is being spread in vast spaces.

Comes an other solution: disinfection through the use of Ultraviolet light or UV light.

What are ultraviolet UV lights?

UV light for rent for house and office in Angeles, Clark, Pampanga Philippines

Ultraviolet is a high energy light created by photons coming from a light source.

In its natural state, UV lights are produced by the sun. Whenever you walk under the sun, you can feel the warmth of it. What you actually feel, is the UV lights generated by the sun.

There are 3 types of UV lights:

UVA: the lowest energy for of UV, it’s mostly responsible for creating warmth and the tanning effect on your skin.

UVB: contains more energy and can be responsible for skin disease if exposed for a very long duration.

UVC: the highest energy category of UV light. Though produced by the sun, we are not affected by it because it is neutralized by the earth’s ozone layer before reaching us.

It is the UVC that has the benefits to kill micro-organism.

How does UV lights kill germs like viruses?

UV lights can penetrate the microbe’s cells and damage their DNA or RNA (for viruses) that contains their genetic codes. Damaged DNA will kill the germs while damaged RNA will not allow the virus to replicate itself.

There’s also evidence that ultraviolet can damage the envelope of a virus and would kill it or would refrain it from attaching itself to our internal cells and avoid an infection.

UVC light for disinfection for home and office use

Who uses UV lights?

Though you might only have heard of it recently but ultraviolet is widely used. Since 1910, it is one of the way we treat water for human consumption.

Lately, some hospitals use devices that generates UV lights to disinfect their rooms, including their operating rooms.

What are the advantages of using UV lights to disinfect a space?

– UV lights don’t use any chemical so it’s environmental friendly.
– They are very easy to use. Just place the light in a room, leave the room and activate it wirelessly.
– They can reach all corners of a room.
– Anything that is in the line of sight of the light will be disinfected.

What are the disadvantages of UV lights?

– UV light is a good solution to disinfect a space but anything that was not in direct line of sight of the light won’t be disinfected.
– UV lights can be harmful to humans if not properly used. For instance, no one must be exposed to the light while in operation. Skin and eye disease might arise if someone has been exposed for some time.

Do’s and don’ts of UV lighting disinfection

Do’s

– DO clean and organize the room before the use of the light so its effect will be maximized.
– DO air the room for 20 minutes after use as an odor is being emanated due to the operations of the light bulb.
– DO handle the light carefully as it is fragile.
– DO use the remote to activate or disactivate the light.

Don’ts

– DO NOT stay in the room when the light is on.
– DO NOT look at the light when in operation
– DO NOT touch the light bulb
– DO NOT touch the light after its operation as it is very hot.

cleanx.clark

CLEAN X Clark

How Clean X can help you with UV lighting disinfection at home or in your establishment

Clean X is your deep cleaning experts. As such, disinfection is one of our core competence. We are using different techniques to clean and disinfect your place. We use steam, disinfectant, fogging and UV light for sanitizing and disinfecting a space.

We can provide our clients UV light disinfection. Also, you can rent our UVC disinfecting light for your own use. We also sell them.

As always, your safety is our priority. We will brief you and expect full compliance for a safe operation of our UV lights. You may visit our UV light operation guide here.

You may also be interested in our wide variety of cleaning services and our disinfection service.

Contact us now so we can help you make your space clean and disinfected.

Book now!

Don’t wait further anymore, book our deep cleaning service now, just one click away: 

Call Us!
Contact Us!
Professional Disinfection Service in Angeles, Clark, Pampanga Philippines

What’s the difference between cleaning, sanitizing and disinfecting

, , , , , , , , 0

As we are all trying to protect ourselves from this pandemic caused by sars-ncov-2 virus that caused COVID-19, let’s review the difference between cleaning, sanitizing and disinfecting.

The whole purpose of this article is to understand how to remove germs from a space. By germs, we mean bacteria, viruses, fungi and parasites. Though all of these are very different in their biological constitution, yet harmful to humans, removing them from your space is very important.

Cleaning

The purpose of cleaning is to remove dirt, stains, allergens soil and chemical residues from the surfaces we want clean.

At the most basic level, using water and wiping it out would already provide some level of cleaning. Adding soap in the water will increase the number of particles to be removed from the surface.

Nevertheless, a clean surface doesn’t mean it is sanitized, nor disinfected. As germs are invisible, you might not see them but they are still able to cause harm to you and families.

For an other level of protection, you might want to sanitize your space.

Cleaning products to clean, disinfect, sanitize

Sanitizing

Sanitizing is the process to reduce the number of micro-organisms (germs) to a safe level for humans.

This is usually done with the help of soap.

When using soap and rinse it with clean water and wiped with a cloth, most of the germs are being removed from the surface.

An other way to sanitize your space is through the use of dry steam. High temperature water vapor projected on the surface will create heat that will kill the micro-organisms.

Though most of them are removed or killed, some might remain in the surface.

To ensure maximum safety for yourself and loved ones, you should disinfect your space.

cleanx.clark

CLEAN X Clark

Disinfecting

Now that a surface has been cleaned and sanitized, it is time to kill all micro-organism.

The process of disinfection involves chemicals that will eliminate germs in your surface.

There are so many of them that can be used such as bleach, Lysol, alcohol and hospital grade disinfectant.

Each one of them has a different curing time that must be taken into account. Some of them are harmful to humans or the environment. Others might damage the surface to be cleaned.

For instance using bleach on fabrics will definitely damage it.

The choice of your disinfectant should be well thought of.

There are other methods to disinfect such as fogging.

Sterilizing

The goal of sterilizing is to reduce the amount of germs to zero. It’s usually done in laboratories with the help of an autoclave to sterilize instruments. The autoclave steams water within its tank for a longer time (e.g. 30 minutes). This will kill every microbe present on the items being sterilized.

An other way to sterilize is with the use of Ultraviolet lights. Please click the following to know more about our UV light treatment.

Clean X’s way to clean, sanitize and disinfect your space.

Our cleaning service will take into consideration the type of surface that needs to be cleaned, sanitized or disinfected.

For instance, for bathroom fixture, we will use a mix of steam and bleach to reach the level of a thorough disinfection.

For kitchen, we will use a detergent and a hospital grade disinfectant to get rid of all germs.

For a desk, we will wipe and remove dirt and stains from the surface. To achieve a disinfection level, we will use our hospital grade disinfectant to kill all micro-organisms.

For furniture that involves fabrics such as a mattress or a sofa. Our best tool to sanitize them is by shampooing, steaming and vacuuming the furniture. Not only it removes the germs but it will make it like new with a pleasant smell.

We are providing a professional cleaning service in Angeles, Clark, Pampanga Philippines. Contact us now for a free quotation or if you have any question.

Don’t forget to check our wide variety of cleaning services and in particular our Disinfection Service.

Clean X Clark

Book now!

Don’t wait further anymore, book our deep cleaning service now, just one click away: 

Call Us!
Contact Us!